How do I reset my jump starter

How Do I Reset My Jump Starter | Easy Guide 2024

A jump starter is a reliable tool that helps revive a dead car battery. Like any other device, there are times when it might malfunction. In such cases, you might think how do I reset my jump starter can save time and effort.

How Do I Reset My Jump Starter

Resetting your jump starter ensures that it’s back in working order for emergencies. This process is simple but often overlooked by users. I will walk you through the basic steps and explain why it matters to maintain your device. On a budget but still need a reliable jump starter? Discover our top picks for the best jump starters under $100.

Quick Look:

To reset your jump starter, turn it off, disconnect it from power, and press the reset button for 5-10 seconds. Reconnect and test to ensure it works properly. Always check the user manual for specific model instructions. For a step-by-step process on jump-starting a car, follow our instructions on how to jumpstart a starter with jumper cables.


Things that cause restarting a jump starter

I’ve seen that jump starters can sometimes stop holding a charge, even after being plugged in for the usual duration. This is one of the first signs that something might be wrong, and a reset could be necessary.

Things that cause restarting a jump starter

Another common issue occurs when the jump starter fails to power on. This usually happens after long or repeated use without giving the device proper downtime. If this happens, the internal system may need resetting to clear any temporary glitches.

If your jump starter begins to beep unexpectedly, this could also signal a malfunction. In such cases, a reset can help clear internal errors, especially if other components like cables and clamps seem fine. Keep these signs in mind to identify when a reset is necessary. Need to jump-start an older or specialty vehicle? Here’s a guide on how to jump-start a 6-volt battery.


How do I reset my jump starter?

Resetting a jump starter is a simple but essential process if it’s not working correctly. Over time, the device might encounter issues like failing to power on or charge. I can reset my jump starter and restore its functionality by following a few straightforward steps.

How do I reset my jump starter?

Step 1: Locate the Reset Button

First, I need to find the reset button on my jump starter. It’s usually on the side or back of the device. If I can’t locate it, I will refer to the user manual for guidance.

Step 2: Disconnect the Jump Starter

Before resetting, I make sure to turn off the jump starter. Then, I disconnect it from any power source and ensure it’s not connected to my vehicle. Safety is always my priority.

Step 3: Press and Hold the Reset Button

Now, I press and hold the reset button for at least five seconds. If needed, I’ll hold it longer, depending on the model. This will allow the jump starter to reset its internal system.

Step 4: Reconnect and Test

Once I’ve completed the reset, I reconnect the jump starter to my vehicle. I’ll test it by attempting to jump-start the car. If it works as expected, the reset was successful!

If you’re looking for a powerful jump starter, check out our recommendations for the best 2000-amp jump starter to handle larger vehicles with ease.


How Reset Steps Vary by Brand

Each jump starter brand has specific reset procedures based on the model. For example, with the Everstart 1200A, resetting involves disconnecting the battery terminals, holding the reset button for about five seconds, and reconnecting the cables. The Dewalt DXAEJ14 requires that the device is fully charged before holding down the reset button for up to ten seconds.

How Reset Steps Vary by Brand

Everstart Jump Starter Reset Instructions

To reset an Everstart 1200A or similar models, I start by disconnecting the red and black jump start cables. Then, I press the reset button for about five seconds before reconnecting everything. This process resolves most common issues like failure to start or charge.

Dewalt Jump Starter Reset Instructions

For models like the Dewalt DXAEJ14, I ensure the battery is fully charged before performing the reset. After that, I press and hold the reset button for five to ten seconds. Once done, I reconnect the unit to check if it works properly. This method usually fixes power-related issues.

Stanley Jump Starter Reset

With models like the Stanley J5C09, resetting is simpler. I disconnect the unit from any power source, hold down the reset button, and reconnect it after five seconds. This often resolves malfunctioning displays or low-power issues.

Tacklife Jump Starter Reset

For Tacklife models, such as the Tacklife T8, resetting involves a manual shutdown. I disconnect the battery, hold down the power button for about five seconds, and reconnect everything. This often works to restore normal functionality after charging problems.

NOCO Genius Boost Reset

Resetting models like the NOCO GB40 requires a slightly different approach. I first disconnect the cables and turn off the unit. Then, I hold the power button for about ten seconds before reconnecting the device. This reset is often used to resolve issues with power delivery or failure to charge.

Schumacher Jump Starter Reset

For Schumacher models such as the Schumacher DSR115, I disconnect the unit and press the reset button for a minimum of five seconds. Once this is done, I reconnect the unit and check if it’s operational. This helps with restoring power after overuse or low battery issues.


What to Do if Resetting Doesn’t Work

If resetting your jump starter doesn’t fix the issue, you may need to explore further troubleshooting steps before seeking professional help.

Check the Battery Life

A depleted or damaged internal battery is a common cause of malfunction. Over time, batteries lose their ability to hold a charge due to regular use or poor maintenance. Using a voltmeter can help check the battery’s voltage. 

What to Do if Resetting Doesn’t Work

If it reads below 12 volts, the battery may be too weak. While recharging could help, a replacement may be necessary if the battery consistently fails to hold power. Always check your jump starter’s manual for instructions on battery replacement.

Inspect the Cables and Clamps

The jump starter’s cables and clamps are crucial for delivering power to your car battery. Damaged, frayed, or corroded cables can prevent the unit from working properly. It’s important to carefully examine these components, cleaning any corrosion from the clamps with a wire brush and a solution of baking soda and water. If the cables are worn out, replacing them is essential to restore proper functionality.

Check for Circuit or Connector Issues

If the battery and cables seem fine, the issue could be inside the jump starter. High heat or improper use might damage internal components, like the circuit board or connector jack. If the connector jack is melted or malfunctioning, it could prevent the jump starter from operating. 

In such cases, opening the device or attempting DIY repairs might void your warranty. If you suspect an internal issue, it’s best to contact the manufacturer or a certified repair service for assistance.

Reset Button Still Unresponsive

Sometimes the reset button itself could be malfunctioning, or the internal system may have a deeper issue that can’t be fixed with a reset. Avoid further troubleshooting if this happens, as it might void any remaining warranties. Contacting the manufacturer or taking the unit to a repair center is the safest option at this stage.

Seek Professional Assistance

If all troubleshooting steps fail, it’s time to consult a professional. Continuing to tinker with the device could lead to further damage or safety hazards. Contacting the manufacturer’s customer service or taking it to a certified technician is the best way forward. They can provide proper guidance or repairs to get your jump starter working again.

Planning to travel with a jump starter? Learn about the latest guidelines for taking a jump starter on a plane in 2024.


Safety Guide: How do I reset my jump starter

When resetting your jump starter, I always prioritize safety to prevent any accidents. Ensuring you follow the right steps can avoid damage to both the device and yourself. Here are some safety tips I recommend:

  • Always disconnect the jump starter from the vehicle before resetting.
  • Make sure the area around you is clear of flammable objects.
  • Avoid resetting if you notice any internal damage, like exposed wires.

I also recommend checking the jump starter’s user manual before attempting a reset. This ensures that you’re following the specific guidelines for your model. It helps prevent voiding warranties or causing further damage.

  • Read the manual for reset instructions.
  • Follow manufacturer guidelines on charging and use.
  • Be cautious if the jump starter gets overheated during use.

Final Words:

knowing how do I reset my jump starter can save you from frustrating moments when your device isn’t working correctly. Following simple steps like locating the reset button, disconnecting the unit, and holding the button for a few seconds can often resolve common issues. 

Always consult your jump starter’s manual for model-specific instructions. Regular maintenance, like checking battery levels and cables, helps keep your jump starter ready for emergencies. Resetting ensures optimal performance when you need it the most.